Syllabus overview
GATE ME syllabus 2027 with the official PDF, 100-mark exam pattern and complete section-wise topic tables for Mechanical Engineering.
Highlights
ME is the official GATE code for Mechanical Engineering.
The official syllabus contains 4 sections: Engineering Mathematics; Applied Mechanics and Design; Fluid Mechanics and Thermal Sciences; Materials, Manufacturing and Industrial Engineering.
The paper is a 3-hour Computer-Based Test for 100 marks, including 15 marks of General Aptitude.
Allowed second-paper codes when ME is primary: AE, CS, DA, IN, NM, PI, RA, XE.
The official IIT Madras PDF is available in the download section.
Quick facts
- Exam
- GATE
- Paper / stage
- ME · Mechanical Engineering
- Current cycle
- 2027
- Page type
- Syllabus
- Conducting body
- GATE
- Language
- English
Detailed syllabus
GATE ME Syllabus 2027 Overview
The official GATE ME syllabus 2027 for Mechanical Engineering is organized into 4 sections, covering Engineering Mathematics, Applied Mechanics and Design, Fluid Mechanics and Thermal Sciences, Materials, Manufacturing and Industrial Engineering. This page follows the IIT Madras syllabus order, provides the correct 100-mark exam pattern, and links the official PDF so aspirants can prepare from a complete, verified checklist.
How to Prepare from the GATE ME Syllabus
- Create one checklist for every official section and retain the same sequence used in the PDF.
- Start with a diagnostic test, then allocate more study time to weak high-coverage sections instead of dividing time equally.
- Solve previous-year GATE questions immediately after completing each topic and record errors by concept, calculation and time pressure.
- Revise formulas, definitions and frequently confused conditions in short weekly cycles, followed by mixed-section tests.
- Use the official PDF as the final scope document; coaching notes should expand a listed topic, not introduce an unrelated syllabus.
GATE ME Official Source and Internal Links
The syllabus tables were checked against the IIT Madras GATE 2027 ME PDF. Use the download section for the database-hosted copy, the GATE syllabus hub to switch papers, and the notification page for registration dates and policy updates.
Exam pattern
GATE ME Exam Pattern 2027
| Section | Marks | How it applies |
|---|---|---|
| General Aptitude | 15 | Common to all GATE papers |
| Engineering Mathematics | 13 | Paper-specific engineering mathematics |
| Core subject questions | 72 | Selected test-paper syllabus |
| Total | 100 | 3-hour CBT |
Section: General Aptitude
- Marks
- 15
- How it applies
- Common to all GATE papers
Section: Engineering Mathematics
- Marks
- 13
- How it applies
- Paper-specific engineering mathematics
Section: Core subject questions
- Marks
- 72
- How it applies
- Selected test-paper syllabus
Section: Total
- Marks
- 100
- How it applies
- 3-hour CBT
GATE ME Question and Marking Rules
| Question type | Possible marks | Negative marking |
|---|---|---|
| MCQ | 1 or 2 | Yes: 1/3 for a wrong 1-mark MCQ; 2/3 for a wrong 2-mark MCQ |
| MSQ | 1 or 2 | No negative marking and no partial marking |
| NAT | 1 or 2 | No negative marking |
Question type: MCQ
- Possible marks
- 1 or 2
- Negative marking
- Yes: 1/3 for a wrong 1-mark MCQ; 2/3 for a wrong 2-mark MCQ
Question type: MSQ
- Possible marks
- 1 or 2
- Negative marking
- No negative marking and no partial marking
Question type: NAT
- Possible marks
- 1 or 2
- Negative marking
- No negative marking
Subject-wise syllabus
GATE ME Syllabus 2027 - Official Section-wise Topics
The tables below preserve the section order and complete topic coverage published by IIT Madras for the GATE 2027 ME paper. Use each table as a study and revision checklist, and verify any later corrigendum against the official PDF.
Section 1: Engineering Mathematics
| Topic area | Official syllabus coverage |
|---|---|
| Linear Algebra | Matrix algebra, systems of linear equations, eigen values and eigen vectors. |
| Calculus | Functions of single variable, limit, continuity and differentiability, mean value theorems, indeterminate forms; evaluation of definite and improper integrals; double and triple integrals; partial derivatives, total derivative, Taylor series (in one and two variables), maxima and minima, Fourier series; gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, applications of Gauss, Stokes and Green’s theorems. |
| Differential Equations | First order equations (linear and nonlinear); higher order linear differential equations with constant coefficients; Euler-Cauchy equation; initial and boundary value problems; Laplace transforms; solutions of heat, wave and Laplace's equations. |
| Complex Variables | Analytic functions; Cauchy-Riemann equations; Cauchy’s integral theorem and contour integral formula; Taylor and Laurent series. |
| Probability and Statistics | Definitions of probability, sampling theorems, conditional probability; mean, median, mode and standard deviation; random variables, binomial, Poisson and normal distributions. |
| Numerical Methods | Numerical solutions of linear and non -linear algebraic equations; integration by trapezoidal and Simpson’s rules; single and multi-step methods for ordinary differential equations. |
Topic area: Linear Algebra
- Official syllabus coverage
- Matrix algebra, systems of linear equations, eigen values and eigen vectors.
Topic area: Calculus
- Official syllabus coverage
- Functions of single variable, limit, continuity and differentiability, mean value theorems, indeterminate forms; evaluation of definite and improper integrals; double and triple integrals; partial derivatives, total derivative, Taylor series (in one and two variables), maxima and minima, Fourier series; gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, applications of Gauss, Stokes and Green’s theorems.
Topic area: Differential Equations
- Official syllabus coverage
- First order equations (linear and nonlinear); higher order linear differential equations with constant coefficients; Euler-Cauchy equation; initial and boundary value problems; Laplace transforms; solutions of heat, wave and Laplace's equations.
Topic area: Complex Variables
- Official syllabus coverage
- Analytic functions; Cauchy-Riemann equations; Cauchy’s integral theorem and contour integral formula; Taylor and Laurent series.
Topic area: Probability and Statistics
- Official syllabus coverage
- Definitions of probability, sampling theorems, conditional probability; mean, median, mode and standard deviation; random variables, binomial, Poisson and normal distributions.
Topic area: Numerical Methods
- Official syllabus coverage
- Numerical solutions of linear and non -linear algebraic equations; integration by trapezoidal and Simpson’s rules; single and multi-step methods for ordinary differential equations.
Section 2: Applied Mechanics and Design
| Topic area | Official syllabus coverage |
|---|---|
| Engineering Mechanics | Free-body diagrams and equilibrium; friction and its applications including rolling resistance, belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc.; plane trusses and frames; virtual work; kinematics and dynamics of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations. |
| Mechanics of Materials | Stress and strain, elastic constants and their relationships; stress and strain components transformations in 2D; Mohr’s circle for plane stress and plane strain; thin -walled pressure vessels; shear force and bending moment diagrams; bending and shear stresses; concept of shear centre; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; Mechanical properties of materials, toughness, hardness, impact strength. |
| Theory of Machines | Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope. |
| Vibrations | Free and forced vibration of linear systems with single and two degrees of freedom, damping estimation and effects; vibration isolation, transmissibility ratio; resonance; critical speeds of shafts; Control system, PID controller, transfer function. |
| Machine Design | Design for static and dynamic loading; failure theories; fatigue strength and the S -N diagram; principles and design of machine elements such as bolted, riveted and welded joints; shafts, gears, belt drives, rolling and sliding contact bearings, brakes and clutches, springs. |
Topic area: Engineering Mechanics
- Official syllabus coverage
- Free-body diagrams and equilibrium; friction and its applications including rolling resistance, belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc.; plane trusses and frames; virtual work; kinematics and dynamics of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations.
Topic area: Mechanics of Materials
- Official syllabus coverage
- Stress and strain, elastic constants and their relationships; stress and strain components transformations in 2D; Mohr’s circle for plane stress and plane strain; thin -walled pressure vessels; shear force and bending moment diagrams; bending and shear stresses; concept of shear centre; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; Mechanical properties of materials, toughness, hardness, impact strength.
Topic area: Theory of Machines
- Official syllabus coverage
- Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.
Topic area: Vibrations
- Official syllabus coverage
- Free and forced vibration of linear systems with single and two degrees of freedom, damping estimation and effects; vibration isolation, transmissibility ratio; resonance; critical speeds of shafts; Control system, PID controller, transfer function.
Topic area: Machine Design
- Official syllabus coverage
- Design for static and dynamic loading; failure theories; fatigue strength and the S -N diagram; principles and design of machine elements such as bolted, riveted and welded joints; shafts, gears, belt drives, rolling and sliding contact bearings, brakes and clutches, springs.
Section 3: Fluid Mechanics and Thermal Sciences
| Topic area | Official syllabus coverage |
|---|---|
| Fluid Mechanics | Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; concept of velocity potential; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings; One dimensional high speed compressible fluid flow; flow through converging and converging-diverging nozzles. |
| Heat Transfer | Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes; boiling and condensation; effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan-Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis. |
| Thermodynamics | Thermodynamic systems and processes; properties of pure substances, behaviour of ideal and real gases; zeroth, first and second laws of thermodynamics, calculation of work, heat, energy changes and entropy changes in various processes; application of first and second laws for analysis of closed and open systems; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations. |
| Applications | Power Engineering: vapour and gas power cycles, concepts of regeneration and reheat; I.C. Engines: Air-standard Otto, Diesel and dual cycles; Basics of Combustion: Air-Fuel Ratio, Equivalence Ratio; Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes; Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines, steam and gas turbines, Air and gas compressors, pumps and pump characteristics. |
Topic area: Fluid Mechanics
- Official syllabus coverage
- Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; concept of velocity potential; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings; One dimensional high speed compressible fluid flow; flow through converging and converging-diverging nozzles.
Topic area: Heat Transfer
- Official syllabus coverage
- Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes; boiling and condensation; effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan-Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis.
Topic area: Thermodynamics
- Official syllabus coverage
- Thermodynamic systems and processes; properties of pure substances, behaviour of ideal and real gases; zeroth, first and second laws of thermodynamics, calculation of work, heat, energy changes and entropy changes in various processes; application of first and second laws for analysis of closed and open systems; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.
Topic area: Applications
- Official syllabus coverage
- Power Engineering: vapour and gas power cycles, concepts of regeneration and reheat; I.C. Engines: Air-standard Otto, Diesel and dual cycles; Basics of Combustion: Air-Fuel Ratio, Equivalence Ratio; Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes; Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines, steam and gas turbines, Air and gas compressors, pumps and pump characteristics.
Section 4: Materials, Manufacturing and Industrial Engineering
| Topic area | Official syllabus coverage |
|---|---|
| Engineering Materials | Crystal structure of common metals, phase diagrams, heat treatment; Properties and applications of engineering materials - metals and alloys, polymers, composites and ceramics; Engineering and true stress-strain diagrams. |
| Casting, Forming and Joining Processes | Different types of casting processes; Patterns, moulds and core; Solidification and cooling, riser and gating design, casting defects; Plastic deformation and yield criteria; Hot working and cold working; Principles of bulk forming and sheet forming processes and estimation of load in these processes; Fundamentals of powder metallurgy and its applications; Principles of welding, brazing, soldering; Solid-state welding processes, adhesive bonding; Non-destructive testing methods. |
| Machining and Machine Tool Operations | Basic machining operations and machine tools; Single-point and multipoint cutting tools; Geometry of single -point turning tools - ASA and ORS systems; Mechanics of machining; Cutting tool materials, tool life and tool wear; Economics of machining; Abrasive machining processes; Principles and applications of non -traditional machining processes; Principles of work holding, jigs and fixtures. |
| Additive Manufacturing | Principles of different types of additive manufacturing processes for engineering materials; Additively manufactured products – advantages, limitations, and applications. |
| Metrology and Inspection | Limits, fits and tolerances; Linear and angular measurements; Comparators; Interferometry; Form and finish measurement; Alignment and testing methods; Tolerance analysis in manufacturing and assembly; Principle of coordinate-measuring machine (CMM). |
| Computer Aided Manufacturing and Automation | Basic concepts of CAD/CAM and their integration tools; NC/CNC machines and CNC programming; Pneumatic, electro -pneumatic, and hydraulic actuators for automation; Programmable logic controllers. |
| Production Planning and Control | Work study, Productivity, Forecasting models, Aggregate production planning, Scheduling, Materials requirement planning, Six sigma, Lean manufacturing, Inventory Control – deterministic models, safety stock, inventory control systems, Quality and reliability concepts for product lifecycle analysis. |
| Operations Research | Linear programming, Simplex method, Transportation, Assignment, Network flow models, Simple queuing models, PERT and CPM. |
Topic area: Engineering Materials
- Official syllabus coverage
- Crystal structure of common metals, phase diagrams, heat treatment; Properties and applications of engineering materials - metals and alloys, polymers, composites and ceramics; Engineering and true stress-strain diagrams.
Topic area: Casting, Forming and Joining Processes
- Official syllabus coverage
- Different types of casting processes; Patterns, moulds and core; Solidification and cooling, riser and gating design, casting defects; Plastic deformation and yield criteria; Hot working and cold working; Principles of bulk forming and sheet forming processes and estimation of load in these processes; Fundamentals of powder metallurgy and its applications; Principles of welding, brazing, soldering; Solid-state welding processes, adhesive bonding; Non-destructive testing methods.
Topic area: Machining and Machine Tool Operations
- Official syllabus coverage
- Basic machining operations and machine tools; Single-point and multipoint cutting tools; Geometry of single -point turning tools - ASA and ORS systems; Mechanics of machining; Cutting tool materials, tool life and tool wear; Economics of machining; Abrasive machining processes; Principles and applications of non -traditional machining processes; Principles of work holding, jigs and fixtures.
Topic area: Additive Manufacturing
- Official syllabus coverage
- Principles of different types of additive manufacturing processes for engineering materials; Additively manufactured products – advantages, limitations, and applications.
Topic area: Metrology and Inspection
- Official syllabus coverage
- Limits, fits and tolerances; Linear and angular measurements; Comparators; Interferometry; Form and finish measurement; Alignment and testing methods; Tolerance analysis in manufacturing and assembly; Principle of coordinate-measuring machine (CMM).
Topic area: Computer Aided Manufacturing and Automation
- Official syllabus coverage
- Basic concepts of CAD/CAM and their integration tools; NC/CNC machines and CNC programming; Pneumatic, electro -pneumatic, and hydraulic actuators for automation; Programmable logic controllers.
Topic area: Production Planning and Control
- Official syllabus coverage
- Work study, Productivity, Forecasting models, Aggregate production planning, Scheduling, Materials requirement planning, Six sigma, Lean manufacturing, Inventory Control – deterministic models, safety stock, inventory control systems, Quality and reliability concepts for product lifecycle analysis.
Topic area: Operations Research
- Official syllabus coverage
- Linear programming, Simplex method, Transportation, Assignment, Network flow models, Simple queuing models, PERT and CPM.
GATE ME Syllabus 2027: exam pattern and key details
| Detail | Current information |
|---|---|
| Exam | GATE |
| Paper / stage | ME · Mechanical Engineering |
| Current cycle | 2027 |
| Page type | Syllabus |
| Conducting body | GATE |
| Language | English |
Detail: Exam
- Current information
- GATE
Detail: Paper / stage
- Current information
- ME · Mechanical Engineering
Detail: Current cycle
- Current information
- 2027
Detail: Page type
- Current information
- Syllabus
Detail: Conducting body
- Current information
- GATE
Detail: Language
- Current information
- English
Common mistakes to avoid
Do not prepare from an old syllabus without comparing it with the latest official notice and the requirements for your exact exam stage.
Candidates also ask
The official ME syllabus contains 4 sections: Engineering Mathematics; Applied Mechanics and Design; Fluid Mechanics and Thermal Sciences; Materials, Manufacturing and Industrial Engineering. The complete topic coverage is arranged in section-wise tables on this page.
GATE ME is a 100-mark, 3-hour Computer-Based Test. General Aptitude carries 15 marks and the remaining marks follow the paper-specific distribution shown above.
The initial GATE 2027 combination table permits these secondary codes when ME is primary: AE, CS, DA, IN, NM, PI, RA, XE. Check the official portal for later changes.
Frequently asked questions
Use the featured PDF button on this page. It opens the database-hosted copy of the official IIT Madras ME syllabus.
Yes. General Aptitude is compulsory in every GATE 2027 test paper and carries 15 marks.
The paper uses Multiple Choice Questions, Multiple Select Questions and Numerical Answer Type questions carrying one or two marks.
Negative marking applies only to incorrect MCQs. MSQ and NAT questions have no negative marking, and MSQs have no partial marking.
Follow the official section order, complete topic-level concepts and examples, solve previous-year questions after each unit, and use full-length mock tests only after completing the major sections.
Downloads
Official GATE ME Syllabus 2027 PDF
- Download GATE ME Mechanical Engineering Syllabus 2027 PDFNEWFEATUREDDownload
Official resources
GATE 2027 Syllabus HubOpen the referenced exam resource.
View resource GATE 2027 NotificationOpen the referenced exam resource.
View resource Official GATE ME Syllabus PDFOpen the referenced exam resource.
View resource GATE 2027 Information Brochure PDFOpen the referenced exam resource.
View resource IIT Madras Test Papers and SyllabusOpen the referenced exam resource.
View resource GATE AE SyllabusOpen the referenced exam resource.
View resource GATE CS SyllabusOpen the referenced exam resource.
View resource GATE DA SyllabusOpen the referenced exam resource.
View resource GATE RA SyllabusOpen the referenced exam resource.
View resource GATE official websiteVisit the conducting body’s official website.
View resource GATE Organising Institute official websiteVerify the latest rules and notices at the official source.
View resource
Topics covered
- GATE ME syllabus 2027
- Mechanical Engineering
- GATE 2027 PDF
- IIT Madras
Research methodology and editorial review
Research methodology
GovtJobsNet editors compare the latest official GATE notice, conducting-body resources and published amendments before updating this page. Where an official 2027 document is pending, the page is marked and reviewed again after release.
- Last updated
- 4 August 2026
- Content cycle
- GATE 2027
Candidate questions and discussion
Ask a question about this GATE syllabus guide. Do not share personal application details.